M-165 LK Wood Stove with Log Rack FM

FM M-165 LK Front Wood Stove with Log Storage

Not everyone wants a heater with fans. The constant whirring of the turbines is annoying in a living room where you're watching TV or reading, and it also means relying on electricity. The M-165 LK is the alternative: heat by radiation and natural convection, absolutely silent operation , and no moving parts that can break down.

Integrated steel log storage

The steel log storage unit is integrated into the system, housed beneath the combustion chamber. You have the day's load readily available, without baskets lying around, and the wood dries naturally with the residual heat: drier wood means better combustion, more heat utilization, and less soot in the flue.

Double and triple combustion: 81% efficiency

The double combustion chamber and double and triple combustion systems reburn gases that would otherwise escape unused through the chimney in a conventional stove. The result is an 81% efficiency with reduced CO and particulate emissions. Independent primary and secondary air control allows you to fine-tune combustion according to your chimney draft and the type of wood.

Vermiculite inside, casting where it matters

The interior of the combustion chamber is lined with vermiculite , a refractory material that reflects heat inwards instead of absorbing it, raising the combustion temperature. The door and grate are made of cast iron , the material that best withstands repeated heating and cooling cycles without warping. The flue outlet, also made of cast iron, is a male fitting with a diameter of 150 mm.

Prepared for watertight installation

It incorporates a 50 mm diameter nozzle to channel primary air from the outside . This is a key feature in well-insulated homes or those with mechanical ventilation: the stove draws oxygen from outside instead of from the living room, preventing drafts and negative pressure problems in the home. With the specific kit (optional accessory), the unit becomes airtight.

Clean glass and a durable finish

The screen-printed glass withstands temperatures up to 750°C and incorporates a clean-glass system : an air curtain sweeps across the inner surface of the glass, delaying soot buildup so the flame remains visible without constant cleaning. The exterior is coated with 800°C heat-resistant black paint .

Main features

• Integrated steel log storage
• No turbines: silent operation and no electricity consumption
• Body made of 4 mm steel
• Chamber interior in vermiculite
• Cast iron door and grille
• Dual camera
• Double and triple combustion systems
• Primary and secondary air regulation
• Crystal-clean system
• Screen-printed glass up to 750 ºC
• Male flue outlet Ø 150 mm in cast iron
• Ø 50 mm nozzle for channeling primary air to the outside
• Anti-heat paint 800 ºC, black

Technical specifications

Available accessories

• Anti-heat paint spray 800 ºC, black
• Black vitreous enamelled anti-condensation sleeve
• Protective steel plate, 900 x 705 mm, black
• Ø 50 mm nozzle kit for primary air ducting (conversion to airtight)

Before you buy: Installation requires a 150 mm diameter flue and must comply with the safety distances to combustible materials specified by the manufacturer. We recommend installation by a qualified professional. Pipes, elbows, and chimney caps are sold separately.