TERMIKA2 - 20 ITALIAN PELLET BOILER CAMINI

When should you choose a pellet boiler like the Termika2 20?

When we're looking for a boiler that, with minimal fuel costs, heats the entire house using pellet combustion, which circulates through the radiators or underfloor heating panels, this is the solution. It has an autonomy of between 10 and 46 hours.

It features a rear flue outlet with an 8cm diameter, a control panel for managing combustion and airflow, and can be programmed daily and weekly. It includes an Autoclean function for automatic crucible cleaning and a Comfort Climate function, which switches off the boiler once the set temperature is reached. It has a 40-liter water capacity, a closed expansion vessel to absorb the increased water pressure generated in the domestic hot water or heating circuit when heating the water, and a blue wire that controls the temperature from the thermostat.

Optionally, an anti-condensation valve can be added, which prevents condensation from forming in the boiler during the heating process, allowing the heating circuit to reach the set temperature more quickly. An antenna kit can also be added for use in areas with poor signal reception.

A pellet boiler is the safest compared to other types of heating systems. Undoubtedly, it offers good value for money.

Main features of the Termika2 20 pellet boiler

- Stove measuring 550 x 780 x 131mm

- Cast iron and steel hearth

- Useful power 21.5kW

- Air power 1.4Kw

- Water power 20.1kW

- Performance 93.5%

- Heatable volume of 525m3

- Heatable area of 210m2

- Consumption 1.3 – 4.5Kg/h

- Stove ignition time of between 13 – 46h

- Pellet hopper 60Kg / 94L

- Rear flue outlet 80Ø mm

- Air intake 50Ø mm

- Stove weight 302Kg

- Daily and weekly time scheduler

- Includes a synoptic panel that allows control of the stove parameters

- Fire Control system that properly regulates the amount of fuel

- AUTOCLEAN function for automatic crucible cleaning

- Climate Comfort function, allows the stove to turn off when the indicated temperature is reached

- Cold self-check allows for the detection of potential problems

- Water content 40L

- Closed expansion vessel included

- Blue cable included to control the temperature from the thermostat

- Optional GSM Plus telephone combiner, which allows remote switching on and off using a mobile phone

- Optional antenna kit, for use in areas with low signal reception

- Hot water storage tank and optional accessories for the installation and production of domestic hot water.

- Steel tanks and optional accessories

- Optional anti-condensation valve prevents condensation in the stove during the heating of the entire water circuit, allowing the heating circuit to reach the set temperature in less time.

- For proper functioning, the installation of the following kits is essential:

· Kit R for single heat source installation without domestic hot water production

· RW kit for single heat source installation with instant domestic hot water production

· R2 kit for combined installation with gas boiler and separator installation without domestic hot water production

· RW2 kit for combined installation with gas boiler and separator installation with domestic hot water production

How is the Termika2 20 pellet boiler supplied?

The pellet boiler is delivered with the rear flue outlet prepared to operate with water.