Elbow 45° with offset telescopic Exoleña Premium Exojo

Exojo Exopellet Inox 316L silicone rosette: rosette with silicone gasket for ceiling or wall installation. Made of AISI 316L stainless steel, laser welded.

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Chinese terminal of the Exogalva line by Exojo: a termination terminal that protects the conduit from rain. Galvanized steel.

Exojo Exopellet line expansion: a diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.5 mm thick. Galvanized steel.

Exojo's Exoleña Premium HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Lead Roof Cover 30°-45°: lead roof cover for roofs with a slope of 30° to 45°. Made of AISI 316L stainless steel, laser welded.

Exojo's Exoleña anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line joining clamp: safety clamp to secure the connection between modules. AISI 304 stainless steel.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva 45° Elbow: 45° elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.