Flat trim rosette Exoleña Premium Exojo

Exojo Exopellet Inox 316L Draft Stabilizer: a draft regulator that automatically stabilizes chimney draft. Made of AISI 316L stainless steel, laser-welded.

1000mm straight duct module with regulator from the Exojo Exoleña line: straight section of duct with integrated draft regulator. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva 90° Tee: 90° T-piece for branching the ventilation duct. Galvanized steel.

Exojo Exogalva 45° Elbow: 45° elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo's Exoleña Premium 250mm straight module: a straight section of flue gas exhaust duct. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoinox SW flat trim: flat trim to cover the opening of the duct. AISI 304 stainless steel.

Exoleña-Exoinox DW adapter from the Exoojo Exoleña line: adapter piece for connecting Exoleña ductwork to Exoinox DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L silicone rosette: rosette with silicone gasket for ceiling or wall installation. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo Exogalva line expansion: expansion to connect one conduit to another of larger diameter. Galvanized steel.

Exojo Exopellet MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

90° tee with collector from the Exojo Exopellet Inox 316L line: 90° tee fitting with side outlet and accessible plug for cleaning. Made of AISI 316L stainless steel, laser welded.

Exojo Exoflex 5-meter flexible aluminum duct: 5-meter flexible aluminum duct for ventilation and air conditioning. Aluminum.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

90° T-fitting with 80mm inlet from the Exopellet line by Exojo: 90° T-fitting with a reduced side outlet of Ø80mm. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.