Telescopic length 330mm Exoleña Exojo

Exojo's Exoleña Premium 45° elbow: a 45° elbow for changes in direction during installation. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L silicone rosette: rosette with silicone gasket for ceiling or wall installation. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet 500mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Chinese terminal of the Exogalva line by Exojo: a termination terminal that protects the conduit from rain. Galvanized steel.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.5 mm thick. Galvanized steel.

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva 90° Tee: 90° T-piece for branching the ventilation duct. Galvanized steel.

Exojo Exoleña 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exoleña 90° Elbow: Flexible 90° wavy elbow for changes of direction. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.