Elbow 90° Exoleña Exojo

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoinox SW 500mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exoinox SW HH coupling sleeve: female-to-female coupling sleeve between duct modules. AISI 316L stainless steel, laser welded.

The 1000mm straight module of the Exoleña Premium line from Exojo is a section of smoke evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all pieces and a glossy black finish, suitable for working up to 600ºC.

90° tee with collector from the Exojo Exopellet Inox 316L line: 90° tee fitting with side outlet and accessible plug for cleaning. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.

Exojo Exoleña line extractor terminal: terminal with mechanical fume extractor. Manufactured in enamelled steel, inside/outside, at 850ºC, laser welded, with a glossy black finish.

Exojo Exogalva MM Joint Sleeve: Male-to-male joint sleeve between duct modules. Galvanized steel.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo Exoleña 90° Elbow: Flexible 90° wavy elbow for changes of direction. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exogalva line 1000mm straight module with regulator: 1000mm straight section of ventilation duct with flow regulator (0.5mm thick). Galvanized steel.

Exojo Exopellet line collector: bottom-closing plug/collector for the flue, accessible for cleaning. Manufactured from enamelled steel, inside and out, fired at 850ºC, laser-welded, with a matte black finish.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.