Enlarger Exoleña Exojo

Exojo Exopellet Inox 316L Collector: Bottom-closing plug/collector for the flue, accessible for cleaning. Made of AISI 316L stainless steel, laser-welded.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line joining clamp: safety clamp to secure the connection between modules. AISI 304 stainless steel.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line manifold: closing cap for the lower end of the system. AISI 316L stainless steel, laser welded.

Exojo Exogalva 45° Elbow: 45° elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exoflex 5-meter flexible aluminum duct: 5-meter flexible aluminum duct for ventilation and air conditioning. Aluminum.

Exojo Exopellet Inox 316L Draft Stabilizer: a draft regulator that automatically stabilizes chimney draft. Made of AISI 316L stainless steel, laser-welded.

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line extension: an extension to connect one conduit to another of larger diameter. AISI 316L stainless steel.

Exojo Exopellet silicone rosette: rosette with silicone gasket for ceiling or wall installation. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet M-8 Support Bracket: Support clamp with M-8 thread for wall mounting. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exoleña 90° Tee: 90° tee fitting with side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exopellet Inox 316L joining clamp: a safety clamp that reinforces the connection between two sections. Made of AISI 316L stainless steel, laser welded.