Elbow 90° with inspection door Exopellet Exojo

Exojo Exoinox SW line rain collar: collar to prevent rainwater from entering through the pipe passage. AISI 304 stainless steel.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

135° T-fitting with Exojo Exopellet line collector: 135° T-fitting with angled side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo's Exoleña Premium telescopic ceiling trim: a telescopic trim set with a ceiling rose. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a glossy black finish.

Exojo Exoleña 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet 940mm extendable module: telescopic element adjustable in length, for custom-sized sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo's Exoleña Premium flat trim plate: a flat trim plate that covers the pipe opening. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium 45° Elbow with Extendable Deflection: This 45° elbow features an adjustable telescopic section for overcoming obstacles. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exoinox SW 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 45° Flat Trim: 45° inclined flat trim for finishing ceiling or wall outlets. AISI 304 stainless steel.

Exogalva line screw-on wall bracket from Exojo: screw-on wall bracket for fixing the duct to the wall. Galvanized steel.

Exojo Exoinox SW line extension: an extension to connect one conduit to another of larger diameter. AISI 316L stainless steel.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.