Tee 90° with 80 mm branch Exopellet Exojo

Exojo Exoleña line collector: bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva line 1000mm straight module with regulator: 1000mm straight section of ventilation duct with flow regulator (0.5mm thick). Galvanized steel.

Exojo's Exoleña Premium line ceiling light: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a glossy black finish.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exogalva M-8 Support: Support with M8 rod for securing the conduit. Galvanized steel.

Exojo Exopellet Inox 316L Draft Stabilizer: a draft regulator that automatically stabilizes chimney draft. Made of AISI 316L stainless steel, laser-welded.

Exojo's Exoleña Premium 250mm straight module: a straight section of flue gas exhaust duct. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet 45° Flat Trim Plate: Flat trim plate at a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exoinox SW line reducer: reducer for connecting one pipe to another of smaller diameter. AISI 316L stainless steel.

Exojo Exopellet horizontal discharge terminal: terminal grille for horizontal flue gas outlet. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exoleña 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L M-8 Mounting Bracket: Support clamp with M-8 thread for wall mounting. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line rain collar: collar to prevent rainwater from entering through the pipe passage. AISI 304 stainless steel.

Exopellet ceiling light from Exojo: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exoinox SW anti-backdraft terminal: a termination terminal that prevents smoke from backdrafting due to wind. AISI 304 stainless steel.