Rain collar Exopellet Inox 316L Exojo

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.

Exojo Exoinox SW line forged support: a support for the slab that holds the duct in the ceiling passage. AISI 304 stainless steel.

Exojo Exoinox SW 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

Exojo Premium Line Collector: Bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoleña M-8 Bracket: Support clamp with M-8 thread for wall mounting. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exoleña-Exoinox DW adapter from the Exoojo Exoleña line: adapter piece for connecting Exoleña ductwork to Exoinox DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

330mm extendable module from Exojo's Exoleña Premium line: a telescopic element adjustable in length for custom-sized sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.