High-temperature black touch-up spray Exojo

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exoleña 90° Elbow: Flexible 90° wavy elbow for changes of direction. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exoinox SW line screw-on wall bracket: screw-on wall bracket for fixing the duct to the wall. AISI 304 stainless steel.

Exojo Exoleña 90° Tee: 90° tee fitting with side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

Exojo Exoleña line expansion: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Collector: Bottom-closing plug/collector for the flue, accessible for cleaning. Made of AISI 316L stainless steel, laser-welded.

Exojo Exogalva HH coupling sleeve: female-to-female coupling sleeve between duct modules. Galvanized steel.

Exojo's Exoleña anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet silicone collector: sealing cap with silicone gasket. Made of enamelled steel, inside/outside, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. Made of AISI 316L stainless steel and laser-welded.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Exojo's Exoleña Premium anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, oven-hardened at 850°C, laser-welded, and has a glossy black finish.

Exopellet-Exoblack DW adapter from the Exojo Exopellet line: an adapter for connecting the Exopellet duct to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.