Joining clamp Exoinox SW Exojo

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Silicone Gasket: Replacement silicone gasket for sealing joints. Made of AISI 316L stainless steel, laser welded.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exoinox SW line screw-on wall bracket: screw-on wall bracket for fixing the duct to the wall. AISI 304 stainless steel.

135° T-fitting with Exojo Exopellet line collector: 135° T-fitting with angled side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exogalva line 1000mm straight module with regulator: 1000mm straight section of ventilation duct with flow regulator (0.5mm thick). Galvanized steel.

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exoinox SW 45° elbow: 45° elbow for changes of direction in installation. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exoleña 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in enamelled steel, inside/outside, at 850ºC, laser welded, with a glossy black finish.

Chinese-style chimney cap from the Exojo Exoleña line: Chinese-style cap, top finial for the chimney. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

Exojo Premium 90° Elbow with Inspection Panel: 90° elbow with inspection panel for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo's Exoleña Premium HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.