Enlarger Exoinox SW Exojo

Chinese terminal of the Exogalva line by Exojo: a termination terminal that protects the conduit from rain. Galvanized steel.

Exojo Exopellet Inox 316L joining clamp: a safety clamp that reinforces the connection between two sections. Made of AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

Exojo's Exoleña 330mm extendable module: a telescopic element adjustable in length for custom-sized sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoinox SW line reducer: reducer for connecting one pipe to another of smaller diameter. AISI 316L stainless steel.

Exojo's Exoleña Premium 45° elbow: a 45° elbow for changes in direction during installation. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet horizontal discharge terminal: terminal grille for horizontal flue gas outlet. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.

Exojo Exopellet Inox 316L Lead Roof Cover 5°-30°: lead roof cover for roofs with a slope of 5° to 30°. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW single-to-double adapter: adapter for connecting Exoinox SW single-wall ductwork to double-wall systems. Laser-welded AISI 316L stainless steel.

Exojo Exopellet Inox 316L ceiling light: decorative rosette/ceiling light for ceiling or wall transitions. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.8 mm thick. Galvanized steel.

1000mm straight duct module with regulator from the Exojo Exoleña line: straight section of duct with integrated draft regulator. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exogalva MM Joint Sleeve: Male-to-male joint sleeve between duct modules. Galvanized steel.