Elbow 90° Exogalva Exojo

Exoleña-Exoinox DW adapter from the Exoojo Exoleña line: adapter piece for connecting Exoleña ductwork to Exoinox DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Exojo Exopellet horizontal discharge terminal: terminal grille for horizontal flue gas outlet. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

Exojo Exoinox SW flat trim: flat trim to cover the opening of the duct. AISI 304 stainless steel.

Exojo Exoinox SW anti-backdraft terminal: a termination terminal that prevents smoke from backdrafting due to wind. AISI 304 stainless steel.

Exojo Exoleña 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in enamelled steel, inside/outside, at 850ºC, laser welded, with a glossy black finish.

Exojo Exoleña 45° Elbow: Flexible 45° wavy elbow for small changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exopellet Inox 316L joining clamp: a safety clamp that reinforces the connection between two sections. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo Exoleña MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Premium 90° Elbow with Inspection Panel: 90° elbow with inspection panel for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

90° T-fitting with 80mm inlet from the Exopellet line by Exojo: 90° T-fitting with a reduced side outlet of Ø80mm. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.