Male-male connector Exoleña Exojo

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.8 mm thick. Galvanized steel.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Straight Module 250mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line rain collar: collar to prevent rainwater from entering through the pipe passage. AISI 304 stainless steel.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo repair spray is a high-temperature aerosol paint with a black finish, designed to touch up small marks or imperfections in the finish of the pipes and accessories of the range, both Exoleña Premium and Exopellet.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.5 mm thick. Galvanized steel.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium 45° Flat Trim Plate: a flat trim plate with a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW 30° Elbow: 30° elbow for smooth changes of direction during installation. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 500mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium flat trim plate: a flat trim plate that covers the pipe opening. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoleña line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.