M-8 bracket Exopellet Exojo

Exojo's Exoleña Premium anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, oven-hardened at 850°C, laser-welded, and has a glossy black finish.

Exojo Exopellet Inox 316L HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.8 mm thick. Galvanized steel.

Exojo Exopellet Inox 316L Straight Module 500mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exopellet 30° Elbow: 30° elbow for smooth changes of direction during installation. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet 45° Flat Trim Plate: Flat trim plate at a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exoleña 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet silicone rosette: rosette with silicone gasket for ceiling or wall installation. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

135° T-fitting with Exojo Exopellet line collector: 135° T-fitting with angled side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Straight Module 250mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exopellet Inox 316L anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. Made of AISI 316L stainless steel and laser-welded.