Single-to-double wall adapter Exoinox SW Exojo

Exojo Exogalva 90° elbow: 90° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet horizontal rainproof outlet: horizontal outlet with rain protection. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a matte black finish.

Exojo's Exoleña Premium line anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo Exopellet 250mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L Straight Module 250mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exopellet joining clamp: a safety clamp that reinforces the connection between two sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Chinese-style chimney cap from the Exojo Exoleña line: Chinese-style cap, top finial for the chimney. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exopellet-Exoblack DW adapter from the Exojo Exopellet line: an adapter for connecting the Exopellet duct to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo's Exoleña Premium telescopic ceiling trim: a telescopic trim set with a ceiling rose. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line forged support: a support for the slab that holds the duct in the ceiling passage. AISI 304 stainless steel.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

Exojo's Exoleña Premium flat trim plate: a flat trim plate that covers the pipe opening. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.