Screw-on wall bracket Exogalva Exojo

Exojo repair spray is a high-temperature aerosol paint with a black finish, designed to touch up small marks or imperfections in the finish of the pipes and accessories of the range, both Exoleña Premium and Exopellet.

90° T-fitting with 80mm inlet from the Exopellet line by Exojo: 90° T-fitting with a reduced side outlet of Ø80mm. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoleña 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Draft Stabilizer: a draft regulator that automatically stabilizes chimney draft. Made of AISI 316L stainless steel, laser-welded.

The 1000mm straight module of the Exoleña Premium line from Exojo is a section of smoke evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all pieces and a glossy black finish, suitable for working up to 600ºC.

Exojo Exopellet horizontal discharge terminal: terminal grille for horizontal flue gas outlet. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L Silicone Gasket: Replacement silicone gasket for sealing joints. Made of AISI 316L stainless steel, laser welded.

Exojo Exoleña MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exoinox SW line manifold: closing cap for the lower end of the system. AISI 316L stainless steel, laser welded.

Exojo Exopellet line collector: bottom-closing plug/collector for the flue, accessible for cleaning. Manufactured from enamelled steel, inside and out, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exogalva HH coupling sleeve: female-to-female coupling sleeve between duct modules. Galvanized steel.

Exojo's Exoleña Premium flat trim plate: a flat trim plate that covers the pipe opening. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from AISI 316L stainless steel, laser welded.