Anti-condensation starter length Exoleña Exojo

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.5 mm thick. Galvanized steel.

Exojo repair spray is a high-temperature aerosol paint with a black finish, designed to touch up small marks or imperfections in the finish of the pipes and accessories of the range, both Exoleña Premium and Exopellet.

Exojo Exoleña line collector: bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L horizontal discharge terminal: terminal grate for horizontal flue gas outlet. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line manifold: closing cap for the lower end of the system. AISI 316L stainless steel, laser welded.

Exogalva line reducer from Exojo: a reducer for connecting one pipe to another of smaller diameter. Galvanized steel.

Exojo Exoinox SW 45° Flat Trim: 45° inclined flat trim for finishing ceiling or wall outlets. AISI 304 stainless steel.

Exojo's Exoleña Premium 45° Flat Trim Plate: a flat trim plate with a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoleña line ceiling light: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium telescopic ceiling trim: a telescopic trim set with a ceiling rose. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Premium Line 45° Elbow with Inspection Panel: 45° elbow with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.8 mm thick. Galvanized steel.

Exojo Exopellet Inox 316L single-to-double adapter: a transition adapter for connecting single-wall and double-wall ducts. Made of AISI 316L stainless steel, laser-welded.