Ceiling plate Exoleña Exojo

Exojo Exopellet Inox 316L Straight Module 500mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Silicone Gasket: Replacement silicone gasket for sealing joints. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva HH coupling sleeve: female-to-female coupling sleeve between duct modules. Galvanized steel.

Exojo's Exoleña Premium line screw-on wall bracket: wall bracket for securing the duct to the wall. Made of enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW M-8 Support: Support with M8 rod for securing the conduit. AISI 304 stainless steel.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Collector: Bottom-closing plug/collector for the flue, accessible for cleaning. Made of AISI 316L stainless steel, laser-welded.

Exojo Exopellet 250mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exoleña line collector: bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet silicone rosette: rosette with silicone gasket for ceiling or wall installation. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exoflex 5-meter flexible aluminum duct: 5-meter flexible aluminum duct for ventilation and air conditioning. Aluminum.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo's Exoleña anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exogalva line reducer from Exojo: a reducer for connecting one pipe to another of smaller diameter. Galvanized steel.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.