Female-female connector Exopellet Inox 316L Exojo

Exojo Exopellet single-to-double adapter: a transition adapter for single-wall and double-wall ducting. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exoleña 45° Elbow: Flexible 45° wavy elbow for small changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium 250mm straight module: a straight section of flue gas exhaust duct. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoleña line ceiling light: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Chinese-style chimney cap from the Exojo Exoleña line: Chinese-style cap, top finial for the chimney. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva line 1000mm straight module with regulator: 1000mm straight section of ventilation duct with flow regulator (0.5mm thick). Galvanized steel.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

1000mm straight duct module with regulator from the Exojo Exoleña line: straight section of duct with integrated draft regulator. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exogalva line anti-backflow terminal: a termination terminal that prevents backdraft. Galvanized steel.

Exojo Exopellet Inox 316L wall-mounted bracket: wall bracket for securing the duct to the wall. Made of AISI 316L stainless steel, laser-welded.

Exojo Exogalva 45° Elbow: 45° elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exopellet Inox 316L anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. Made of AISI 316L stainless steel and laser-welded.

The 1000mm straight module of the Exoleña Premium line from Exojo is a section of smoke evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all pieces and a glossy black finish, suitable for working up to 600ºC.