Aluminium flexible pipe 5 m Exoflex Exojo

Exojo Exopellet telescopic roof trim: a telescopic trim set with a rosette for the roof opening. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a matte black finish.

Exojo Exoinox SW line forged support: a support for the slab that holds the duct in the ceiling passage. AISI 304 stainless steel.

Exojo Exoleña line expansion: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.8 mm thick. Galvanized steel.

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exogalva line expansion: expansion to connect one conduit to another of larger diameter. Galvanized steel.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exogalva 90° elbow: 90° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo's Exoleña Premium 250mm straight module: a straight section of flue gas exhaust duct. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoinox SW line Chinese terminal: a termination terminal that protects the pipe from rain. AISI 304 stainless steel.

Exojo Exogalva line straight module 1000mm thick: straight section of ventilation duct of 1000 mm, in sheet metal 0.5 mm thick. Galvanized steel.

Exojo's Exoleña Premium anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, oven-hardened at 850°C, laser-welded, and has a glossy black finish.

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.