Elbow 45° Exopellet Inox 316L Exojo

Exojo Exoinox SW flat trim: flat trim to cover the opening of the duct. AISI 304 stainless steel.

Exogalva line reducer from Exojo: a reducer for connecting one pipe to another of smaller diameter. Galvanized steel.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L Lead Roof Cover 5°-30°: lead roof cover for roofs with a slope of 5° to 30°. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L rain collar: a cap-type roof collar for roof openings. Made of AISI 316L stainless steel, laser-welded.

Exojo Exopellet telescopic roof trim: a telescopic trim set with a rosette for the roof opening. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a matte black finish.

Exojo Exoinox SW 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L single-to-double adapter: a transition adapter for connecting single-wall and double-wall ducts. Made of AISI 316L stainless steel, laser-welded.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Lead Roof Cover 30°-45°: lead roof cover for roofs with a slope of 30° to 45°. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Draft Stabilizer: a draft regulator that automatically stabilizes chimney draft. Made of AISI 316L stainless steel, laser-welded.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exogalva 90° elbow: 90° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo Exoinox SW line extension: an extension to connect one conduit to another of larger diameter. AISI 316L stainless steel.