Straight length 1000mm with inspection door Exoleña Premium Exojo

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

Exojo Exopellet line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exoinox SW line screw-on wall bracket: screw-on wall bracket for fixing the duct to the wall. AISI 304 stainless steel.

Exojo Exopellet Inox 316L rain collar: a cap-type roof collar for roof openings. Made of AISI 316L stainless steel, laser-welded.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Exojo Exopellet 500mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet single-to-double adapter: a transition adapter for single-wall and double-wall ducting. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exopellet ceiling light from Exojo: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exoleña 90° Tee: 90° tee fitting with side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line reducer: reducer for connecting one pipe to another of smaller diameter. AISI 316L stainless steel.

Exojo Exopellet 250mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.