45° elbow Ø150 mm Exoleña Premium Exojo

Exojo Exoleña line collector: bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva 90° Tee: 90° T-piece for branching the ventilation duct. Galvanized steel.

Exojo Exoinox SW line reducer: reducer for connecting one pipe to another of smaller diameter. AISI 316L stainless steel.

Exojo Exoleña 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in enamelled steel, inside/outside, at 850ºC, laser welded, with a glossy black finish.

Exojo Exoinox SW line screw-on wall bracket: screw-on wall bracket for fixing the duct to the wall. AISI 304 stainless steel.

Exojo Exoinox SW anti-backdraft terminal: a termination terminal that prevents smoke from backdrafting due to wind. AISI 304 stainless steel.

Exojo Exoleña M-8 Bracket: Support clamp with M-8 thread for wall mounting. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.

Chinese-style clamped end fitting from Exojo's Exogalva line: a termination fitting that protects the pipe from rain, with a safety clamp. Galvanized steel.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo's Exoleña Premium line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line manifold: closing cap for the lower end of the system. AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo's Exoleña Premium HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.