Straight length 1000mm Exoleña Premium Exojo

Exojo Exopellet telescopic roof trim: a telescopic trim set with a rosette for the roof opening. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a matte black finish.

Exojo Premium Line 45° Elbow with Inspection Panel: 45° elbow with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet Inox 316L rain collar: a cap-type roof collar for roof openings. Made of AISI 316L stainless steel, laser-welded.

Exojo Exopellet silicone rosette: rosette with silicone gasket for ceiling or wall installation. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exoleña line expansion: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

90° tee with collector from the Exojo Exopellet Inox 316L line: 90° tee fitting with side outlet and accessible plug for cleaning. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva 45° elbow: 45° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo Premium 45° Elbow with Deflection: This 45° elbow with deflection is designed to overcome obstacles during installation. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exogalva 90° Tee: 90° T-piece for branching the ventilation duct. Galvanized steel.

Exojo Exopellet Inox 316L Silicone Gasket: Replacement silicone gasket for sealing joints. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva M-8 Support: Support with M8 rod for securing the conduit. Galvanized steel.

Exojo Exogalva line collector: closing plug for the lower end of the system. Galvanized steel.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exoinox SW line extension: an extension to connect one conduit to another of larger diameter. AISI 316L stainless steel.