Corrugated elbow 90° Exogalva Exojo

Exojo Exopellet Inox 316L M-8 Mounting Bracket: Support clamp with M-8 thread for wall mounting. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva 90° elbow: 90° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo Exoinox SW line draft stabilizer: draft stabilizer for regulating the draft of the flue. AISI 304 stainless steel.

Exojo Exoleña line ceiling light: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a glossy black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exoleña 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exogalva line expansion: expansion to connect one conduit to another of larger diameter. Galvanized steel.

Exojo Exogalva 45° elbow: 45° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo's Exoleña Premium 45° elbow: a 45° elbow for changes in direction during installation. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

Exoleña-Exoblack DW adapter from the Exojo Exoleña Premium line: adapter piece for connecting Exoleña ductwork to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet single-to-double adapter: a transition adapter for single-wall and double-wall ducting. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo's Exoleña Premium anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, oven-hardened at 850°C, laser-welded, and has a glossy black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exoinox SW HH coupling sleeve: female-to-female coupling sleeve between duct modules. AISI 316L stainless steel, laser welded.