Extractor cowl Exoleña Exojo

Exojo Exoleña MM coupling sleeve: male-to-male coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Lead Roof Cover 30°-45°: lead roof cover for roofs with a slope of 30° to 45°. Made of AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Chinese terminal of the Exogalva line by Exojo: a termination terminal that protects the conduit from rain. Galvanized steel.

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exopellet single-to-double adapter: a transition adapter for single-wall and double-wall ducting. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exogalva line rotating terminal: a rotating, flute-shaped discharge terminal that directs the air outlet. Galvanized steel.

Exojo Exoinox SW M-8 Support: Support with M8 rod for securing the conduit. AISI 304 stainless steel.

Exojo's Exoleña Premium line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Chinese-style clamped end fitting from Exojo's Exogalva line: a termination fitting that protects the pipe from rain, with a safety clamp. Galvanized steel.

Exojo Exopellet 250mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.