Telescopic length 570-940mm Exopellet Inox 316L Exojo

Exojo Exoinox SW line wind clamp: centering clamp to hold and stabilize the duct against the wind. AISI 304 stainless steel.

Exojo Exoinox SW single-to-double adapter: adapter for connecting Exoinox SW single-wall ductwork to double-wall systems. Laser-welded AISI 316L stainless steel.

Exojo Exoleña 45° Elbow: Flexible 45° wavy elbow for small changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

135° T-fitting with Exojo Exopellet line collector: 135° T-fitting with angled side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet silicone rosette: rosette with silicone gasket for ceiling or wall installation. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L Straight Module 250mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Lead roofing sheet 5°-30° from the Exoinox SW line by Exojo: lead roofing sheet for roofs with a slope of 5° to 30°. Lead.

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exogalva line anti-backflow terminal: a termination terminal that prevents backdraft. Galvanized steel.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo's Exoleña Premium flat trim plate: a flat trim plate that covers the pipe opening. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW line reducer: reducer for connecting one pipe to another of smaller diameter. AISI 316L stainless steel.

Exojo Exoinox SW anti-backdraft terminal: a termination terminal that prevents smoke from backdrafting due to wind. AISI 304 stainless steel.

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.

Extension of the Exojo Exopellet Inox 316L line: diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Straight Module 1000mm: straight section of flue gas evacuation duct. Manufactured in AISI 316L stainless steel, laser welded.