Straight length 1000mm Exopellet Inox 316L Exojo

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exopellet line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Lead Roof Cover 30°-45°: lead roof cover for roofs with a slope of 30° to 45°. Made of AISI 316L stainless steel, laser welded.

Exojo Premium 90° Elbow with Inspection Panel: 90° elbow with inspection panel for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exoinox SW 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

The 1000mm straight module of the Exoleña Premium line from Exojo is a section of smoke evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all pieces and a glossy black finish, suitable for working up to 600ºC.

Exojo Exoinox SW line joining clamp: safety clamp to secure the connection between modules. AISI 304 stainless steel.

Exojo Exogalva line collector: closing plug for the lower end of the system. Galvanized steel.

Exojo Exopellet 1000mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, inside/outside, at 850ºC, laser welded, with a matte black finish.

Exojo Exoinox SW line forged support: a support for the slab that holds the duct in the ceiling passage. AISI 304 stainless steel.

Exojo Exoinox SW flat trim: flat trim to cover the opening of the duct. AISI 304 stainless steel.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exoleña line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exopellet-Exoblack DW adapter from the Exojo Exopellet line: an adapter for connecting the Exopellet duct to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.