Tee 90° Exogalva Exojo

Exoleña-Exoblack DW adapter from the Exojo Exoleña Premium line: adapter piece for connecting Exoleña ductwork to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet silicone gasket: replacement silicone gasket for sealing joints. Made of enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

90° tee with collector from the Exojo Exopellet Inox 316L line: 90° tee fitting with side outlet and accessible plug for cleaning. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exoleña anti-backdraft chimney cap: This anti-backdraft cap prevents smoke from entering the room due to wind. It is made of enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet silicone collector: sealing cap with silicone gasket. Made of enamelled steel, inside/outside, fired at 850ºC, laser welded, with a matte black finish.

Exojo Premium Line 45° Elbow with Inspection Panel: 45° elbow with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

Exojo's Exoleña Premium line anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exogalva line screw-on wall bracket from Exojo: screw-on wall bracket for fixing the duct to the wall. Galvanized steel.

90° T-fitting with 80mm inlet from the Exopellet line by Exojo: 90° T-fitting with a reduced side outlet of Ø80mm. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo's Exoleña Premium 90° T-fitting: a 90° T-piece with a side outlet. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoleña M-8 Bracket: Support clamp with M-8 thread for wall mounting. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exoinox SW 500mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exogalva M-8 Support: Support with M8 rod for securing the conduit. Galvanized steel.