Male-male connector Exopellet Inox 316L Exojo

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exoinox SW line extractor terminal: static-wind extractor terminal that improves duct draft. AISI 304 stainless steel.

Exogalva line anti-backflow terminal with clamp from Exojo: a termination terminal that prevents air backflow, with a safety clamp. Galvanized steel.

Exogalva line screw-on wall bracket from Exojo: screw-on wall bracket for fixing the duct to the wall. Galvanized steel.

Exojo Exopellet line expansion: a diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

The 500mm straight module from the Exoleña Premium line by Exojo is a section of flue gas evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all parts and a glossy black finish, suitable for working up to 600ºC.

Exojo Exopellet Inox 316L 45° Elbow: 45° elbow for changes of direction in installation. Manufactured from AISI 316L stainless steel, laser welded.

Exojo Exopellet draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel (interior/exterior) at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L Straight Module 1000mm: straight section of flue gas evacuation duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Made of AISI 316L stainless steel, laser welded.

Exojo Exoleña line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet Inox 316L Lead Roof Cover 5°-30°: lead roof cover for roofs with a slope of 5° to 30°. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 30°-45° Lead Roof Cover: Lead roof covers for roofs with a slope of 30° to 45°. Lead.

Exojo Exogalva 90° elbow: 90° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo Exopellet 45° Flat Trim Plate: Flat trim plate at a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.