Reducer Exoinox SW Exojo

Exojo's Exoleña Premium line expansion: a diameter extender (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside and out at 850ºC, laser-welded, with a glossy black finish.

Exojo Exogalva line collector: closing plug for the lower end of the system. Galvanized steel.

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.

Exojo Exoleña HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exopellet 45° Flat Trim Plate: Flat trim plate at a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exogalva line rotating terminal: a rotating, flute-shaped discharge terminal that directs the air outlet. Galvanized steel.

150mm diameter 45° elbow from Exojo's Exoleña Premium line, for changing the direction of flue gas outlets in stoves, fireplaces, and wood-burning inserts. Manufactured from enamelled steel, inside and out, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet Inox 316L M-8 Mounting Bracket: Support clamp with M-8 thread for wall mounting. Made of AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium telescopic ceiling trim: a telescopic trim set with a ceiling rose. Manufactured from enamelled steel, oven-baked at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet 500mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.

Exojo Exopellet Inox 316L Lead Roof Cover 30°-45°: lead roof cover for roofs with a slope of 30° to 45°. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 90° Tee: 90° T-piece for diverting the flue gas exhaust duct. AISI 316L stainless steel, laser welded.

Exojo Exopellet line screw-on wall bracket: wall bracket for fixing the duct to the wall. Made of enamelled steel, fired at 850ºC, laser-welded, with a matte black finish.

Exojo Exopellet Inox 316L 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exojo Exoinox SW 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.