Straight length 1000mm thickness 0,5 mm Exogalva Exojo

Exojo Exoleña line collector: bottom-closing plug/collector for the pipe, accessible for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exoinox SW line manifold: closing cap for the lower end of the system. AISI 316L stainless steel, laser welded.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo Exogalva line expansion: expansion to connect one conduit to another of larger diameter. Galvanized steel.

Exojo's Exoleña Premium line anti-condensation starter module: This starter module features an anti-condensation chamber to prevent condensate dripping during flue start-up. It is manufactured from enamelled steel, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet Inox 316L Silicone Gasket: Replacement silicone gasket for sealing joints. Made of AISI 316L stainless steel, laser welded.

90° T-fitting with 80mm inlet from the Exopellet line by Exojo: 90° T-fitting with a reduced side outlet of Ø80mm. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet Inox 316L Straight Module 250mm: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exoinox SW line collector with drain: sealing plug with drain outlet to evacuate condensation. AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exogalva 90° curled elbow: 90° curled elbow for changing the direction of the ventilation duct (0.5 mm thick). Galvanized steel.

Exojo Exoinox SW single-to-double adapter: adapter for connecting Exoinox SW single-wall ductwork to double-wall systems. Laser-welded AISI 316L stainless steel.

Exojo Exopellet line collector: bottom-closing plug/collector for the flue, accessible for cleaning. Manufactured from enamelled steel, inside and out, fired at 850ºC, laser-welded, with a matte black finish.

Exoleña-Exoinox DW adapter from the Exoojo Exoleña line: adapter piece for connecting Exoleña ductwork to Exoinox DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo Exopellet 500mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exopellet 250mm straight module: straight section of flue gas evacuation duct. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.