Tee 90° with collector Exopellet Inox 316L Exojo

Exojo Exopellet Inox 316L HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Made of AISI 316L stainless steel, laser welded.

Exojo's Exoleña Premium 90° Elbow: 90° elbow for right-angle changes of direction. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

The 1000mm straight module of the Exoleña Premium line from Exojo is a section of smoke evacuation duct for wood stoves and fireplaces, made of enamelled steel inside and out at 850ºC with laser welding on all pieces and a glossy black finish, suitable for working up to 600ºC.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exojo Exoinox SW M-8 Support: Support with M8 rod for securing the conduit. AISI 304 stainless steel.

Exojo Exogalva line 1000mm straight module with regulator: 1000mm straight section of ventilation duct with flow regulator (0.5mm thick). Galvanized steel.

Chinese-style clamped end fitting from Exojo's Exogalva line: a termination fitting that protects the pipe from rain, with a safety clamp. Galvanized steel.

Exojo Exopellet 45° Flat Trim Plate: Flat trim plate at a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet anti-backdraft terminal: This anti-backdraft cap prevents smoke from escaping due to wind. It is manufactured from enamelled steel, oven-hardened at 850°C, laser-welded, and has a matte black finish.

Exojo Exoinox SW 1000mm straight module: straight section of flue gas exhaust duct. Manufactured in AISI 316L stainless steel, laser welded.

Exojo Exopellet line expansion: a diameter expansion piece (converting from a smaller to a larger diameter) for connecting sections of different cross-sections. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a matte black finish.

Exojo Exopellet HH coupling sleeve: female-to-female coupling sleeve for joining two sections. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a matte black finish.

Exojo Exoleña line draft stabilizer: a draft regulator that automatically stabilizes chimney draft. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium line ceiling light: decorative ceiling rose/ceiling light for ceiling or wall transitions. Manufactured from enamelled steel, oven-baked at 850ºC, laser-welded, with a glossy black finish.

150mm diameter 45° elbow from Exojo's Exoleña Premium line, for changing the direction of flue gas outlets in stoves, fireplaces, and wood-burning inserts. Manufactured from enamelled steel, inside and out, fired at 850°C, laser-welded, and finished with a glossy black coating.

Exojo Exopellet Inox 316L rain collar: a cap-type roof collar for roof openings. Made of AISI 316L stainless steel, laser-welded.