Corrugated elbow 45° Exogalva Exojo

Exojo Exopellet Inox 316L 90° Elbow: 90° elbow for right-angle changes of direction. Made of AISI 316L stainless steel, laser welded.

Exogalva line screw-on wall bracket with double anchoring from Exojo: screw-on wall bracket with double anchoring for fixing large diameter ducts to the wall. Galvanized steel.

150mm diameter 45° elbow from Exojo's Exoleña Premium line, for changing the direction of flue gas outlets in stoves, fireplaces, and wood-burning inserts. Manufactured from enamelled steel, inside and out, fired at 850°C, laser-welded, and finished with a glossy black coating.

1000mm straight module with inspection hatch from the Exojo Exoleña Premium line: straight section of duct with inspection hatch for cleaning. Manufactured from enamelled steel, fired at 850ºC, laser welded, with a glossy black finish.

Exoleña-Exoblack DW adapter from the Exojo Exoleña Premium line: adapter piece for connecting Exoleña ductwork to Exoblack DW double-wall systems. Manufactured from enamelled steel, fired at 850ºC, laser-welded, with a glossy black finish.

Exojo's Exoleña Premium 45° elbow: a 45° elbow for changes in direction during installation. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exopellet 90° tee with collector: 90° tee fitting with side outlet and accessible plug for cleaning. Manufactured from enamelled steel, fired at 850°C, laser welded, with a matte black finish.

Exojo Exoinox SW 30° Elbow: 30° elbow for smooth changes of direction during installation. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet Inox 316L Collector: Bottom-closing plug/collector for the flue, accessible for cleaning. Made of AISI 316L stainless steel, laser-welded.

Exogalva line screw-on wall bracket from Exojo: screw-on wall bracket for fixing the duct to the wall. Galvanized steel.

Exojo Exopellet Inox 316L horizontal rainproof outlet: horizontal outlet with rain protection. Made of AISI 316L stainless steel, laser welded.

Exojo Exopellet line reducer: a diameter reduction fitting (converting from a larger to a smaller diameter) for connecting sections of different cross-sections. Manufactured from steel, enamelled inside/outside at 850ºC, laser-welded, with a matte black finish.

Exojo's Exoleña Premium 45° Flat Trim Plate: a flat trim plate with a 45° angle, for angled steps. Manufactured from enamelled steel, fired at 850°C, laser-welded, with a glossy black finish.

Exojo Exoinox SW 30°-45° Lead Roof Cover: Lead roof covers for roofs with a slope of 30° to 45°. Lead.

Exojo Exogalva 45° elbow: 45° elbow for changing the direction of the ventilation duct. Galvanized steel.

Exojo's Exoleña Premium 135° Tee: 135° tee fitting with angled side outlet. Manufactured from enamelled steel, fired at 850°C, laser welded, with a glossy black finish.